Can I Ride a Dirt Bike Without Oil?

Dirt Bike Oil is an expensive thing that is needed to run your dirt bike engine but have you ever thought what will happen to you if you will not have to buy oil every time and spend lots of money

So can you ride a dirt bike without oil? you can’t ride your dirt bike without oil you can ride your dirt bike for only a few minutes and then from where the engine will just destroy itself so you should not ride your dirt bike without oil

Understand oil is a must-have thing you must pour into your dirt bike without it you will not be able to ride your entire engine simply destroyed and therefore you must take this into account.

Need dirt bike safety gear? Click here to buy safety gear for dirt bike riding on amazon or go check my sales pages of recommended safety gear page click here to view.

How to change the oil in your dirt bike?

The oil in your dirt bike is something that must be replaced and maintained all the time because if you don’t replace it several times a year, your engine can become contaminated which can cause more problems with your bike and can eventually destroy it. Therefore, it is very important to constantly change and maintain the oil in your dirt bike.

But a lot of riders do not know when to change the oil or how to do so and because that I’m going to help you and show you all the things you need to know before you change the oil and how to go about it.

What equipment do you need to change the oil in your dirt bike?

Gloves to protect your skin – A very important thing before you replace the oil is to wear gloves to protect your skin from hot oil.

Screws- It is very important that you have a few screws on the side in case you lose a certain screw

Rags – It is very important that you have a few rags on the side so that you can clean oil residue from the oil filter

Oil pan – The role of an oil pan is to collect all the dirty oil you get out of the dirt bike

Oil – It’s very important that you have new oil to replace the polluted oil. Later in this post, I will recommend the best oil to use.

Step 1 – Turn on the engine

It is very important to start the engine and let the oil heat up because it is much easier to work with hot oil than cold oil. In addition, when the oil is warm it becomes runnier and easier to work with. You need to run your engine for 5 to 10 minutes to allow the oil to heat up.

Step 2 – Remove the filthy oil

Now to the thinking part, remove the oil from the container.

The first thing you need to do is lay a pan or a lid that can catch oil under the dirt bike

Remove the oil filling cap to remove the dirty oil. It is also important to note how many screws are in the oil filler cover because it varies in dirt bikes, there are two screws in some dirt bikes and some only have one screw.

In addition, it is very important to tilt and move dirt bikes from side to side to remove the remaining oil residue in the tank.

Step 3 – Remove the oil filter cover (only for 4-stroke dirt bikes)

This step is only for those who have a 4-stroke dirt bike. If you have a 2-stroke dirt bike you can skip this step.

Ok then, the third step is to remove the oil filter. To remove it you must undo the screws that hold it.

It is very important to remember where you took the screws out of the oil filter because it has a lot of screws in different sizes.

After removing all the screws you need to remove the oil filter very gently because you don’t want to damage anything.

Step 4 – Clean the oil filter (only for those who have 4 stroke dirt bikes)

This step is intended only for those who have 4-stroke dirt bikes. It is also not required for those who only want to clean the oil filter.

The fourth step is for those who want to thoroughly clean and reuse their oil filter. Spray the oil filter with soap and water to clean it.

It is very important to clean the oil filter thoroughly and be sure not to leave particles and dirt.

Step 5 – Return the oil filter (only for 4-stroke dirt bikes)

After you have finished cleaning the oil filter you need to put it back.

It is important to return the oil filter correctly and not in the opposite way because it can cause engine problems.

Then you need to tighten the screws. It is very important to put the screws in the right place and tighten them enough to hold the oil filter securely.

Step 6 – Replace the screws

Before you put new oil in the dirt bike you have to put all of the screws back in and tighten them.

It is very important to return all the screws to their correct place and tighten them so that they do not fall out.

Step 7 – Fill with new oil

After emptying the filthy oil, it is time for the fun part – filling the dirt bike with new oil.

To do this there are two areas for oil entry. Once you find them fill them with new oil you when you’re finished, lock the screw.

And that’s it! You’ve finished replacing the oil in your dirt bike.

Enduro bike rider on action. Turn on sand terrain

How to know if you need to change the oil in your dirt bike

A lot of riders ask me how do I know when I need to change the oil in my dirt bike and the truth is, there are a number of things you will need to check to know if you need to replace the oil.

The first thing you can do is to open the oil tank and check if there are certain bubbles that are created inside the oil or if there is an oil leak in the oil tank. If do you see one of these things appear it means that you need to replace the oil.

The color of the oil changes – The simplest and easiest way to check if you need to change your oil is to check if the color of the oil has changed. If you see that it has changed, it means that it should be replaced. I recommend taking clean oil and comparing it to the color of the oil in the bike to see the difference.

Dirty oil – Another thing that shows you need to replace the oil is if you see that dirt has got into the oil. If you see even a tiny bit of dirt it means your oil is contaminated and you have to replace it.

How often should you change the oil?

Usually, you need to change the oil every 5 to 10 hours of using the dirt bike. If you ride every day or you race your bike, you will need to replace the oil at a much higher frequency.

In addition, if you do not replace the oil in your dirt bike every 5 to 10 hours of using it you can cause huge damage.

Recommended oils

The best oils for 2-stroke dirt bikes

1. Maxima Castor 927

The Maxima Castor 927 is the best oil for 2-stroke dirt bikes in my opinion.

First of all, the oil is very high quality and lasts for a long time. In addition, the oil does an amazing job of preventing rust and it maintains a very high temperature over time.

I would highly recommend the Maxima Castor 927 and as I said, I think it is the best oil for 2-stroke dirt bikes. I found it on Amazon at a very cheap price. Click here to view.

2. Lucas Oil Semi-Synthetic

Lucas Oil Semi-Synthetic is another popular oil that has been very successful in the United States.

Firstly, the oil helps the engine have a long life. Also, the oil does not require a lot of fuel from the engine, which means that the oil is very economical in fuel consumption. In is also designed for smoke-free burning.

I highly recommend the Lucas Oil Semi-Synthetic because of the amazing features it offers.

3. Bel-Ray SL2 Semi-Synthetic

The Bel-Ray SL2 Semi-Synthetic is a very reliable company that has manufactured oils since 1970.

First of all, this oil is very high quality. In addition, the oil has a perfect cooling mechanism when it becomes too hot and it can be excellent for those who ride their dirt bikes on the road.

I really like and recommend the Bel-Ray SL2 Semi Synthetic.

The best oils for 4-stroke dirt bikes

1. Maxima Premium 4 Motorcycle

The Maxima Premium 4 Motorcycle Engine Oil offers many special and cool features.

First of all, this oil is very stable in terms of viscosity, which is very important for riding a dirt bike. In addition, the oil cools the engine perfectly when the temperature of the dirt bike is very hot.

I highly recommend the Maxima Premium 4 Motorcycle Engine Oil and I think this is among the best oils available for 4-stroke dirt bikes.

2. Castrol Power 1Synthetic 4T

Castrol Power 1Synthetic 4T is a very reliable company that has produced oils for dirt bikes since 1899.

First, the oil can handle any load you put on it and it is very suitable for riders who race or ride at high speeds. In addition, the oil is very stable and you do not feel it while riding your bike.

I personally recommend the Castrol Power 1Synthetic 4T for riders who race or who like to ride their dirt bikes at very high speeds.

3. Motul E-Tech 100 Synthetic Oil

The Motul E-Tech 100 Synthetic Oil is a perfect oil for anyone who rides their dirt bike on the road.

In addition, there is electrochemical bonding for amazing coverage, which is very important for the comfort of riding.

I personally love the Motul E-Tech Synthetic 100 and I certainly recommend it to anyone who rides their dirt bike on the road. Also, I found the oil at a very cheap price on Amazon. Click here to view.

Summary

Today I showed you all the things you need to know before you change the oil in your dirt bike and also how to replace it.